Connect Sensors/Actuators - WAGO 765-1205/0100-0000 Manual

765-1205/0100-0000 Connection
®
Figure 7: Line Topology for EtherCAT Networks (Module Image May Differ)

9.5 Connect Sensors/Actuators

The sensor/actuator cable provides power to the connected sensors/actuators and trans-
fers the sensor and actuator signals.
8 Design Power
Note the current load capacity of the supply contacts; see "Rule 3" in
Supply [} 33], section Rule 3: Ports X01, X02 etc.
The following figure shows the potential routing of the two load circuits within the module.
Product manual | Version: 1.0.0 51
8DIO FLD EC DC 24V 2.0A