Parameterizing The Product Via Opc Ua; Identifying Devices; Table 44 Identify Devices - WAGO 765-1205/100-000 Product Manual

765-1205/100-000
The OPC UA client establishes a connection via the following URL:
opc.tcp://IP-address:4840
For IP-address, use the IP address of the device.
The client can access device parameters anonymously (only read access) or with a user-
name/password (read/write access). The username and password are set with the
WAGO Webserver IO Field.
The following figure shows an excerpt from the device's information model.

10.3.3.1 Parameterizing the Product via OPC UA

10.3.3.1.1 Identifying Devices

The device provides nodes for device identification. For example, the OPC UA client can
read out the version of the device firmware used in the SoftwareRevision node. The
path to this node is:
Root > Object > DeviceSet > [device name]
Node Name
Manufacturer
ManufacturerUri
Model
Product manual | Version: 2.0.0
8DIO FLD EC DC 24V 2.0A
Node Class Access
Variable Read
Variable Read
Variable Read
Commissioning
Figure 26: OPC UA: Device Information Model
Table 44: Identify Devices
Description
Device manufacturer
URL of the device manufacturer
Short name of the device
77