Connect Sensors/Actuators - WAGO 765-1103/100-000 Manual

765-1103/100-000 Connection
Figure 9: Network Topology (Module Appearance May Differ)

9.5 Connect Sensors/Actuators

The sensor/actuator cable powers the connected sensors/actuators and transfers the
sensor and actuator signals.
Note the current load capacity of the supply contacts; see "Rule 3," section Rule 3: Ports
X01, X02 etc. in 8 Designing the Power Supply [} 33].
The following figure shows the potential routing of the two load circuits within the module.
Product manual | Version: 2.2.0 51
16DO FLD PN DC 24V 2.0A