Connect Devices; Connecting A Conductor To The Cage Clamp; Figure 11: Connecting A Conductor To A Cage Clamp - WAGO 750 Manual

WAGO-I/O-SYSTEM 750
750-471 4AI U/I Diff Galv
6

Connect Devices

6.1

Connecting a Conductor to the CAGE CLAMP

The WAGO CAGE CLAMP
finely stranded conductors.
Only connect one conductor to each CAGE CLAMP
Only one conductor may be connected to each CAGE CLAMP
Do not connect more than one conductor at one single connection!
If more than one conductor must be routed to one connection, these must be
connected in an up-circuit wiring assembly, for example using WAGO feed-
through terminals.
1. For opening the CAGE CLAMP
above the connection.
2. Insert the conductor into the corresponding connection opening.
3. For closing the CAGE CLAMP
now clamped firmly in place.

Figure 11: Connecting a Conductor to a CAGE CLAMP

All manuals and user guides at all-guides.com
®
connection is appropriate for solid, stranded and
®
Connect Devices
®
!
®
insert the actuating tool into the opening
simply remove the tool. The conductor is
®
47
®
®
.
Manual
Version 1.0.0