Connect Sensors/Actuators - WAGO 765-1503/100-000 Product Manual

Connection

9.5 Connect Sensors/Actuators

The sensor/actuator cable powers the connected sensors/actuators and transfers the
sensor and actuator signals.
Note the current load capacity of the supply contacts; see "Rule 3," section Rule 3: Ports
X01, X02 etc. in
The following figure shows the potential routing of the two load circuits within the module.
52 Product manual | Version: 2.0.0
16DO FLD EI DC 24V 2.0A
Figure 9: Network Topology (Module Appearance May Differ)
8 Designing the Power Supply
765-1503/100-000
[} 34].