Communication Interfaces - WAGO 765-1205/100-000 Product Manual

765-1205/100-000
This app allows you to display product information, read and write process data and ad-
just settings and parameters for both fieldbus modules and IO-Link devices. The commu-
nication this requires takes place through the Bluetooth
once a Data Matrix code has been scanned to select the product.
Users and the associated access rights can be set up and managed. Outputs can be
forced and inputs set in order to support commissioning of systems. The current mea-
sured values of a port can be displayed (temperature, voltage, current and states) and
configured (including operating mode and filters). Products can be reset to the factory
settings and firmware restarted.
Short Overview
• Scanning a data matrix code of a module for product selection
• Establishing a Bluetooth
nication
• Querying product information including serial number (UII – Unique Item Identifier)
• Managing known devices for direct selection without scanning the DM code
• Querying sensor/actuator data (diagnostics, manufacturer, configuration, status, cycle
time etc.)
• Parameterizing ports (input, input filters, output and substitute value strategy)
• Forcing outputs (DO)
• Simulating inputs (DI)
• Parameterizing WAGO IO-Link Masters*
• Guided download of IODDs from the Internet for IO-Link devices (IODDfinder)*
• Importing the device description file (IODD) of the IO-Link device*
• Parameterizing IO-Link devices*
• Managing customer-specific product names
• Displaying diagnostic and status information
• Managing product-specific documents (datasheets, manuals etc.)
• User and rights management
* Only applies to modules with integrated IO-Link master ports
The functional scope described can vary depending on the module type.
Note
Read the online help!
You can find Product-specific information on the WAGO App I/O Field in the online help
for the app.
An iOS version of the WAGO I/O Field app is available for free in the Apple App Store,
and an Android version in the Google Play Store.

5.6 Communication Interfaces

The module has the following interfaces and supports the following protocols:
• ETHERNET Interfaces
– EtherCAT
– HTTP for the WAGO Webserver I/O Field
– TCP for the OPC UA server
Product manual | Version: 2.0.0
8DIO FLD EC DC 24V 2.0A
®
BLE (Bluetooth Low Energy) connection for wireless commu-
®
®
interface of the mobile device
Functions
31