Step 10. Lubricate Machine - MacDon M150 Assembly Instructions Manual

STEP 10. LUBRICATE MACHINE

Recommended Lubricant
SPEC DESCRIPTION
High Temp. Extreme
Pressure (EP2)
SAE Multi- Performance With 1% Max
Purpose. Molybdenum Disulphide
(NLGI Grade 2).Lithium
Base
a. Wipe grease fitting with a clean cloth before
greasing, to avoid injecting dirt and grit.
b. Inject grease through fitting with grease gun until
grease overflows fitting, except where noted.
c. Leave excess grease on fitting to keep out dirt.
d. Replace any loose
immediately.
e. If fitting will not take grease, remove and clean
thoroughly. Also clean lubricant passageway.
Replace fitting if necessary.
f. Refer to the following illustrations for identifying
the various locations that require lubrication.
Form # 169018
UNLOADING AND ASSEMBLY
USE
As Required
Unless
Otherwise
Specified.
or broken fittings
(continued next page)
27
Model Year - 2009