Step 11. Lubricate Machine - MacDon M105 Assembly Instructions Manual

STEP 11. LUBRICATE MACHINE

Recommended Lubricant
SPEC DESCRIPTION
High Temperature
Extreme Pressure (EP2)
Performance With
SAE Multi-
1% Max Molybdenum Disulphide
Purpose.
(NLGI Grade 2).
Lithium Base
DANGER
Stop engine, and remove key from ignition
before leaving Operator's seat for any
reason. A child or even a pet could engage
an idling machine.
a. Wipe grease fitting with a clean cloth before
greasing, to avoid injecting dirt and grit.
b. Inject grease through fitting with grease gun until
grease overflows fitting, except where noted.
c. Leave excess grease on fitting to keep out dirt.
d. Replace any loose
immediately.
e. If fitting will not take grease, remove and clean
thoroughly. Also clean lubricant passageway.
Replace fitting if necessary.
f. Refer to the following illustrations to identify the
various locations requiring lubrication.
Form 169558
UNLOADING AND ASSEMBLY
USE
As Required
Unless
Otherwise
Specified.
or broken fittings
(continued next page)
29 Revision A