To Install The Insulating Cup For The Uecd - Agilent Technologies Agilent 7890 Series Maintenance Manual

13
Maintaining the uECD

To Install the Insulating Cup for the uECD

WA R N I N G
254
1 Gather the following:
• Nut warmer insulation (See
for the uECD"
• Insulation cup assembly
Load the GC maintenance method
2
become ready.
Be careful! The oven and/or detector may be hot enough to cause
burns. If the detector is hot, wear gloves to protect your hands.
Install the insulation in the cup. Line up the slots in the
3
insulation with the slot in the cup.
Push the wire spring lever to the right to uncover the
4
hole.
5 With a capillary column installed to prevent insulation
contamination of the detector, slide the column into the
slot on the insulation cup and place the cup over the
makeup gas adapter.
"Consumables and Parts
on page 244.)
and wait for the GC to
Maintaining Your GC