Agilent Technologies Agilent 7890 Series Maintenance Manual page 307

Agilent 7890 Series Gas Chromatograph
Maintaining Your GC
16
Maintaining the G3435A/G3436A FPD
Consumables and Parts for the FPD 308
Exploded Parts View of the FPD 310
To Install a Capillary Column Adapter in the FPD 311
To Attach a Capillary Column to the FPD 313
To Change the FPD Wavelength Filter 315
To Remove the FPD Vent Tube 318
To Replace the FPD Ignitor 320
To Install the FPD Vent Tube and Cover 322
This section describes how to maintain the Agilent
G3435A/G3436A Single or Dual Flame Photometric detector.
This detector is typically available only on a 7890A GC;
however, this detector may be available on a 7890B GC
which has been upgraded from a 7890A. To determine the
FPD version, lift the detector top cover and locate the metal
FPD cover (see "Exploded Parts View of the FPD" on
page 310). If the cover is solid, the FPD is a G3435A or
G3436A. Refer to the maintenance procedures in this
section. If the cover is perforated (has round vent holes), the
+ +
detector is an FPD (see "Maintaining the FPD " on
page 289).
Agilent Technologies
307