Agilent Technologies Agilent 7890 Series Maintenance Manual page 4

6 Maintaining the Purged Packed Inlet
7 Maintaining the COC Inlet
4
To Clean the Septum Seat in the Insert Assembly of the Split/Splitless
Inlet 54
To Change the Liner and O-Ring on the Split/Splitless Inlet
To Replace the Gold Seal on the Split/Splitless Inlet
To Replace the Filter in the Split Vent Line for the Split/Splitless Inlet
To Clean the Split/Splitless Inlet
To Bakeout Contaminants from the Split/Splitless Inlet
Consumables and Parts for the Purged Packed Inlet
Exploded Parts View of the Purged Packed Inlet
To Install a Capillary Column with the Purged Packed Inlet
To Change the Septum on the Purged Packed Inlet
To Clean the Septum Seat in the Purged Packed Inlet
To Install an Adapter on the Purged Packed Inlet
To Change the O-Ring on the Purged Packed Inlet
To Change the Glass Liner on the Purged Packed Inlet
To Install an Insulation Cup on the Purged Packed Inlet
To Clean the Purged Packed Inlet
To Bakeout Contaminants from the Purged Packed Inlet
To Install a Packed Metal Column
To Install a Packed Column Adapter on a Detector Fitting
To Install a Packed Glass Column
To Condition a Packed Column
To Install Ferrules on a Packed Metal Column
Consumables and Parts for the COC Inlet
Exploded Parts View of the COC Inlet
To Install a Capillary Column with the COC Inlet
To Check the Needle-to-Column Size on the COC Inlet
To Change a Septum on the COC Inlet
To Install an Insert on the COC Inlet
To Clean the COC Inlet
64
87
90
94
97
99
102
106
112
114
116
56
59
61
66
68
71
72
77
79
81
83
84
86
89
92
107
110
Maintaining Your GC