Agilent Technologies Agilent 7890 Series Maintenance Manual page 278

14
Maintaining the NPD
278
Start the Adjust offset process. Enter the desired offset in
24
the Target offset field. The default offset is 20 pA for Blos
beads, and 30 pA for white or black beads. For white and
black beads, an offset of 25 to 30 pA is sufficient for
most applications. The bead life may be shortened at a
higher offset.
Reset the bead counter. See
25
the Operation Manual.
To Reset an EMF Counter
Maintaining Your GC
in