Agilent Technologies Agilent 7890 Series Maintenance Manual page 120

7
Maintaining the COC Inlet
C A U T I O N
120
Guide
Plunger carrier loop
Bearing clip
Syringe carriage
Slide
Bearing
Do not to pull the assembly by its metal shaft, as it is easily bent.
6 Carefully use the bearing to pull the rod down until you
can lift the assembly out of the syringe carriage.
To install the needle support assembly, use your right
7
hand to insert the upper end of the rod into the plastic
guide to the right of the plunger carrier loop.
Maintaining Your GC