Agilent Technologies Agilent 7890 Series Maintenance Manual page 179

Table 26 Nuts, ferrules, and hardware for capillary columns (continued)
Column id (mm) Description
.100 and .200 Ferrule, Vespel/graphite,
0.37-mm id
Ferrule, Vespel/graphite,
0.4-mm id
Ferrule, graphite, 0.5-mm id
Ferrule, graphite, 0.4-mm id
Column nut, finger-tight (for
.100- to .320-mm columns)
All Ferrule, no-hole
Capillary column blanking nut
Column nut, universal
Column cutter, ceramic wafer
Pencil, diamond tipped
Ferrule tool kit
Maintaining Your GC
Typical use
0.1-mm and 0.2-mm capillary
columns
0.1-mm, 0.2-mm, and 0.25-mm
capillary columns
0.1-mm, 0.2-mm, 0.25-mm, and
0.32-mm capillary columns
Connect column to inlet or detector
Testing
Testing–use with any ferrule
Connect column to inlet or detector
Cutting capillary columns
Cutting capillary columns
Ferrule installation
Maintaining the VI
Part number/quantity
5062-3516 (10/pk)
5181-3323 (10/pk)
5080-8853 (10/pk)
500-2114 (10/pk)
5020-8292
5181-3308 (10/pk)
5020-8294
5181-8830 (2/pk)
5181-8836 (4/pk)
420-1000
440-1000
10
179