7700 MultiFrame Manual
7735CEM Composite Encoder with Monitoring
7.6.
CONFIGURING THE VIDEO PROCESSING CONTROLS
The Video Processing menu is used to configure parameters associated with the composite encoder video
processing. The chart below shows the items available in the Video Processing menu.
NTSC setup
pedestal
Line 21 setup
Composite display
mode
Video level
Hue
Saturation
Contrast
Brightness
7.6.1. Adding the NTSC Setup Pedestal
Video/SID
Video Processing
NTSC setup
pedestal
Off
On
7735CEM-26
Gray background indicate un-implemented or un-tested features
Selects whether the NTSC 7.5 IRE pedestal will be added to the composite
analog output video
Controls line 21 processing
Selection of colour or B/W modes
Controls the output video level
Controls the output video hue
Controls the output video saturation
Controls the output video white level
Controls the output video black level
Composite NTSC analog video may have a 7.5 IRE pedestal while 4:2:2
SDI video does not. This control, when set to On, will add the pedestal
and re-scale the video accordingly. The setup pedestal should not be
present on composite video when operating in Japan.
Revision 1.1.1