Vistalink ® Remote Monitoring/Control; What Is Vista Link; Ista Link Monitored Parameters; Ista - evertz MultiFrame 7700 Manual

6. VISTALINK
6.1. WHAT IS V

ISTA

VistaLINK is Evertz's remote monitoring and configuration platform which operates over an Ethernet
®
network using Simple Network Management Protocol (SNMP). SNMP is a standard computer network
protocol that enables different devices sharing the same network to communicate with each other.
VistaLINK provides centralized alarm management, which monitors, reports, and logs all incoming alarm
®
events and dispatches alerts to all the VLPro Clients connected to the server. Card configuration through
VistaLINK PRO can be performed on an individual or multi-card basis using simple copy and paste
®
routines, which reduces the time to configure each module separately. Finally, VistaLINK
user to configure devices in the network from a central station and receive feedback that the configuration
has been carried out.
There are 3 components of SNMP:
1. An SNMP manager, also known as a Network Management System (NMS), is a computer running
special software that communicates with the devices in the network. Evertz VL-Fiber demo Manager
graphical user interface (GUI), third party or custom manager software may be used to monitor and
control Evertz VistaLINK
2. Managed devices, (such as 7707EO and 7707OE cards), each with a unique address (OID),
communicate with the NMS through an SNMP Agent. Evertz VistaLINK
reside in the 3RU 7700FR-C MultiFrame and communicate with the manager via the 7700FC
VistaLINK frame controller module, which serves as the Agent.
®
3. A virtual database, known as the Management information Base (MIB), lists all the variables being
monitored and which both the Manager and Agent understand. Please contact Evertz for further
information about obtaining a copy of the MIB for interfacing to a third party Manager/NMS.
For more information on connecting and configuring the VistaLINK
Controller chapter.
6.2. V LINK MONITORED PARAMETERS
ISTA
®
The following parameters can be remotely monitored through the VistaLINK
Parameter
Optical Power
Signal Valid
Output Fault
Carrier Fault
Output Mode jumper
7707OE-DS3/E3 Optical to Electrical Converter for DS3/E3 Signals
REMOTE MONITORING/CONTROL
®
LINK ?
®
enabled fiber optic products.
®
Description
A range of values describing optical power at the
fiber input.
Indicates the presence of a valid input signal (the
state of the SIGNAL VALID LED).
Indicates the presence of an output fault condition
(the state of the OUTPUT FAULT LED).
Indicates the presence of a carrier fault condition
(the state of the CARRIER FAULT LED).
State of the OUTPUT jumper.

Table 6-1: VistaLINK

Monitored Parameters
®
Revision 1.5
7700 MultiFrame Manual
enabled 7700 series modules
®
network, see the 7700FC Frame
®
interface:
®
7707OE-DS3/E3-11
enables the
®