Vista Link Tm Monitored Parameters; Vista Link Tm Controlled Parameters; Table 7: Vistalink™ Monitored Parameters - evertz 7700 Manual

7700 MultiFrame Manual
7710UC-KF HD Key/Fill Up Converter
TM
8.2. VISTALINK
The following parameters can be remotely monitored through the VistaLINK™ interface.
Parameter
Fill Input Present
Key Input Present
Input Video Standard
Gen Lock Present
Gen Lock Standard
GPI1 State
GPI2 State
GPI3 State
GPI4 State
Video Delay
Local Remote Mode
TM
8.3. VISTALINK
Parameter
Video Frame Rate
Video Standard Input
Video Standard Output
Reference Select
V Phase Offset
H Phase Offset
H Filter Cutoff
V Filter Cutoff
H Rate Limit
V Rate Limit
Aspect Ratio
Panel Colours Red
Panel Colours Green
Panel Colours Blue
Input H Start
Input H Stop
Input V Start
Input V Stop
7710UC-KF-24
MONITORED PARAMETERS
Description
Indicates the presence of a valid fill input signal.
(the state of the VIDEO PRESENT LED)
Indicates the presence of a valid key input signal.
(the state of the VIDEO PRESENT LED)
Indicates video standard of input signals
Indicates the presence of a valid genlock reference signal. (the
state of the GENLOCK LED)
Indicates video standard of genlock reference signal
Indicates the state of the GPI1 input
Indicates the state of the GPI2 input
Indicates the state of the GPI1 input
Indicates the state of the GPI2 input
Video Delay
Indicates the whether the 7710UC-KF is under local control or
VistaLINK™ control (. (the state of DIP switch 8)
Table 7: VistaLINK™ Monitored Parameters
CONTROLLED PARAMETERS
Description
Select the video input frame rate
Selects the video input standard.
Selects the video output standard.
Set video or external genlock for card locking
Sets the vertical phase
Sets the horizontal phase
Sets the type of the horizontal filter in the scaler
Sets the type of the vertical filter in the scaler
Enable a rate limit on the horizontal edges.
Enable a rate limit on the vertical edges.
Selects the aspect ratio of the output picture.
Sets the Red colour of the panels.
Sets the Green colour of the panels.
Sets the Blue colour of the panels.
Sets the left side crop positions
Sets the right side crop position
Sets the top crop position
Sets the bottom crop position
Revision 0.2