Setting The Coarse Analog Input Gain Range - evertz 7700 Manual

7700 MultiFrame Manual
7736CD2 Dual Composite Decoder
9.4.

SETTING THE COARSE ANALOG INPUT GAIN RANGE

Eight Jumpers located near the rear of the A7735AI2 submodule are used to set a
J13, J12, J6, J30:
coarse gain level.
When the jumpers are not installed (or installed so that only one side is connected),
the input range is optimized for when peak audio levels up to 24dBu. (Default)
When the jumpers are installed, best performance is achieved when input peak
levels are below 18dBu.
Page - 30 Revision 1.0.4