Setting The Gain Of The Input Sources For Mixer A; Setting The Gain For Channel 1 A Of Mixer A - evertz 7721AE8-DEE-HD Manual

7700 MultiFrame Manual
7721AE8-DEE-HD HD-SDI/SD-SDI Audio Embedder with Dolby Encoder

6.7.2. Setting the Gain of the Input Sources for Mixer A

Audio Processor
MAGC
Ch1 A Gain Control
Ch1 B Gain Control
Ch2 A Gain Control
Ch2 B Gain Control
Ch3 A Gain Control
Ch3 B Gain Control
Ch4 A Gain Control
Ch4 B Gain Control
Ch5 A Gain Control
Ch5 B Gain Control
Ch6 A Gain Control
Ch6 B Gain Control
Ch7 A Gain Control
Ch7 B Gain Control
Ch8 A Gain Control
Ch8 B Gain Control
Ch9 A Gain Control
Ch9 B Gain Control
Ch10 A Gain Control
Ch10 B Gain Control
Ch11 A Gain Control
Ch11 B Gain Control
Ch12 A Gain Control
Ch12 B Gain Control
Ch13 A Gain Control
Ch13 B Gain Control
Ch14 A Gain Control
Ch14 B Gain Control
Ch15 A Gain Control
Ch15 B Gain Control
Ch16 A Gain Control
Ch16 B Gain Control
6.7.2.1.

Setting the Gain for Channel 1 A of Mixer A

The parameters for each pair (A and B) for all 16 channels are the same. For the sake of simplicity in the
manual, only the menus for Channel 1 Input A for Mixer A will be described.
Audio Processor
MAGC
1AGC
-24 to +24 dB
0
Page-26
This control allows the user to adjust the gain of the input
sources for each pair (A and B) of the 16 channels of Mixer A.
1AGC
1BGC
2AGC
2BGC
3AGC
3BGC
4AGC
4BGC
5AGC
5BGC
6AGC
6BGC
7AGC
7BGC
8AGC
8BGC
9AGC
9BGC
AAGC
ABGC
BAGC
BBGC
CAGC
CBGC
DAGC
DBGC
EAGC
EBGC
FAGC
FBGC
GAGC
GBGC
This parameter sets the gain for Channel 1 A of Mixer A. For
unity gain, set the parameter to 0. The adjustment range is +/-
24 dB, in increments of 0.1 dB.
For non-PCM data passing, the gain setting should be set to
0dB.
Revision 1.2