7700 MultiFrame Manual
7714HDC High Quality Down Converter
6.7.1. Configuring the Output Audio Channel Sources
There are eight controls that select the source of the eight audio channels being processed.
simplicity, only the selection control for output ch1 will be shown in the manual.
Audio Process
Output Ch1
Input Ch1
Input Ch2
Input Ch3
Input Ch4
Input Ch5
Input Ch6
Input Ch7
Input Ch8
Mono mix Ch 1&2
Mono mix Ch 3&4
Mono mix Ch 5&6
Mono mix Ch 7&8
Mute
6.7.2. Setting Gain for Each Audio Channel
There are eight controls that set the gain of the eight audio channels being processed. For simplicity, only
the gain control for input channel 1 will be shown in the manual.
Audio Process
Input Ch1 gain
0 dB
+/- 24 dB
7714HDC - 30
This control selects the source of audio for output channel 1. The output
can be taken from any of the input channels or a mono mix of pairs. The
output can also be muted.
The default is that the input channel will be the same as the output channel
(i.e. output channel 1 will come from input channel 1 on de-embedder A)
The audio gain controls are used to adjust the level of the respective output
audio channel. The gain controls have a range of +/-24 dB with 1/10 dB
resolution. The displayed value is the amount of gain (+ve), or attenuation
(-ve), in decibels, where 0dB corresponds to unity gain.
Revision 1.1
For