Removing Edsff Ssd Modules; If Applicable, "Switching On The Server" On Page; If Applicable, Rescan Available Devices From Your Os; If Applicable, "Installing The Front Cover With Lock" On Page - Fujitsu PRIMERGY RX2540 M6 Upgrade And Maintenance Manual

Figure 95: Installing the EDSFF SSD module
▶ Insert the EDSFF SSD module into a drive bay and carefully push back as
far as it will go (1).
▶ Close the locking lever to lock the EDSFF SSD module in place (2).
Concluding steps
▶ If applicable,
"Switching on the server" on page

▶ If applicable, rescan available devices from your OS.

▶ If applicable,
"Installing the front cover with lock" on page
7.5.10.3

Removing EDSFF SSD modules

Customer Replaceable
Unit (CRU)
Tools: tool-less
The EDSFF SSD module is controlled by an onboard controller. For
more information, see the Intel VROC user guide. If VMD function is
disabled in BIOS, the EDSFF SSD module is not supported. If VMD
function is enabled in BIOS, see the "Intel Virtual RAID on CPU (Intel
VROC) User Guide" for more information.
RX2540 M6
Hard disk drive (HDD) / solid state disk (SSD)
Upgrade and Maintenance Manual
69.
69.
Hardware: 5 minutes
193