Fujitsu PRIMERGY RX2540 M6 Upgrade And Maintenance Manual page 257

Figure 151: Installing the expansion card
▶ Carefully insert the expansion card into the desired PCI slot and press down
firmly until it is fully seated in the slot.
▶ If applicable, install SFP+ transceiver modules into the new expansion card,
see "Installing SFP+ transceiver modules" on page
▶ If applicable, connect the FBU cable to the FBU, see
page 317.
RX2540 M6
Expansion cards and backup units
Upgrade and Maintenance Manual
239.
"Installing an FBU" on
257