Fujitsu PRIMERGY RX2540 M6 Upgrade And Maintenance Manual page 214

Hard disk drive (HDD) / solid state disk (SSD)
▶ Notice the guide pin on the PSU cage and the recess hole on the chassis
(see circles).
Figure 114: Installing the rear HDD cage 1
▶ Position the rear HDD cage into the chassis (1).
▶ Push the rear HDD cage in the direction of the arrow (2) until the hook (see
orange circle) fit in place.
▶ Fasten the screw (3, see blue circle).
▶ If applicable, install a RAID controller or a retimer card, see
expansion card" on page
214
255.
Upgrade and Maintenance Manual
"Installing an
RX2540 M6