Figure 53: Installing the 2.5-inch HDD/SSD in the 3.5-inch installation frame (B)
▶ Fasten the 2.5-inch HDD/SSD with four screws.
Removing a 2.5-inch HDD/SSD from a 3.5-inch installation frame
▶ Please proceed in reversed order.
Concluding steps
No steps needed.
7.3.4
EDSFF SSD and EDSFF installation frame
Installing or removing the installation frame is only necessary for Japan.
Customer Replaceable
Unit (CRU)
Tools:
Phillips PH1 / (+) No. 1 screw driver
RX2540 M6
Hard disk drive (HDD) / solid state disk (SSD)
Upgrade and Maintenance Manual
Hardware: 5 minutes
141