Configuring the RAID array, see the documentation of the RAID
controller, used in your configuration, see
page
16.
6.5
Installing EDSFF SSD modules
Removing an EDSFF dummy module
Figure 39: Removing an EDSFF dummy module
▶ Press both tabs together (1) and pull the dummy module out of its bay (2).
CAUTION
▶
Keep the dummy module for future use.
▶
Always replace dummy modules into unused HDD/SSD bays to
comply with applicable EMC regulations and satisfy cooling
requirements.
RX2540 M6
"List of documents" on
Operating Manual
Operation
91