Fujitsu PRIMERGY RX2540 M6 Upgrade And Maintenance Manual page 153

▶
"Removing the fan cage" on page
▶ Release all HDD modules and pull them out a few centimeters, see
"Removing a 3.5-inch HDD module" on page
CAUTION
The HDD modules need not to be removed.
▶
If you want to remove them nevertheless, check if all HDD
modules are uniquely identified so that you can reinsert them
into their original bays.
▶ Release all dummy modules and pull them out a few centimeters, see
"Removing a 3.5-inch HDD dummy module" on page
Removing the defective 10x 3.5-inch HDD backplane
▶ If applicable, remove the internal RAID riser module, see
internal RAID riser module" on page
▶ Disconnect all cables from the HDD backplane.
Figure 63: Removing the 10x 3.5-inch HDD backplane
▶ Release the eight screws (see circles).
▶ Take out the HDD backplane at a slight angle.
RX2540 M6
Hard disk drive (HDD) / solid state disk (SSD)
74.
273.
Upgrade and Maintenance Manual
149.
146.
"Removing the
153