Replacing The Microsd Card - Fujitsu PRIMERGY RX2540 M6 Upgrade And Maintenance Manual

System board and components
▶ Install the new Dual microSD 64GB Enterprise, see
microSD 64GB Enterprise" on page
Concluding steps
▶ If applicable,
"Installing the riser module 1" on page
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ If applicable,
"Installing the front cover with lock" on page
Software configuration
To install the ESXi to the Dual microSD 64GB Enterprise, see
configuration" on page
16.7.5

Replacing the microSD card

Upgrade and Repair Unit
(URU)
Tools: – Phillips PH2 / (+) No. 2 screw driver (for cover 2)
– a pair of side-cutting pliers
Preliminary steps
▶
"Locating the defective server" on page
▶ If applicable,
"Removing the front cover with lock" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶ If applicable,
"Removing the riser module 1" on page
514
505.
60.
65.
69.
508.
52.
Upgrade and Maintenance Manual
"Installing the Dual
72.
Hardware: 5 minutes
49.
53.
56.
70.
69.
"Software
52.
RX2540 M6