Fujitsu PRIMERGY RX2540 M6 Upgrade And Maintenance Manual page 420

Accessible drives
Removing the LTO drive
Figure 287: Disconnecting the cable from the LTO drive
▶ Disconnect the LTO cable from the LTO drive (1).
▶ Disconnect the end of the power cable from connector "PWR6" (2) on the
system board.
▶ Disconnect the end of the SAS cable from connector "C0" (3, close-up) on
the PSAS CP500i RAID card in PCIe slot 5.
420 Upgrade and Maintenance Manual RX2540 M6