Using The Chassis Id Prom Tool - Fujitsu PRIMERGY RX2540 M6 Upgrade And Maintenance Manual

Basic software procedures
▶ Start the ServerView RAID Manager and log in.
▶ Select the desired SAS controller.
In the General tab you can find data on the selected object including its SAS
address.
For more information, see the "ServerView Operations Manager -
Server Management" user guide and the "ServerView RAID
Manager" user guide.
▶ Inform the customer about the new SAS address. The customer need the
new SAS address, especially when the server is connected to a Fujitsu
Storage ETERNUS system.
5.3.14

Using the Chassis ID Prom Tool

The Common Operation Panel (COP) contains the Chassis ID EPROM that
stores the following system information:
– server name and model
– housing type
– serial number
– manufacturing data
– information depending on the configuration:
– installed HDD/SSD/EDSFF backplanes
– installed rear HDD/SSD cages
– installed expansion cards (for example EP5xxi)
In order to integrate your system into the ServerView Management
environment and to enable server installation using the ServerView Installation
Manager, system information needs to be completed and corrected.
110 Upgrade and Maintenance Manual RX2540 M6