Liquid cooling (LC)
CAUTION
CPUs are extremely sensitive to electrostatic discharge and therefore
must always be handled with care.
▶
After a CPU has been removed from its protective sleeve or from its
socket, place it upside down on a nonconducting, antistatic surface.
▶
Never push a CPU over a surface.
Preliminary steps
▶
"Locating the defective server" on page
▶
"Suspending BitLocker functionality" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶
"Removing the air duct" on page
▶ If applicable, remove the riser module, see
on page
70.
Removing the LC kit
▶ Remove the cross bar, see
370
52.
78.
"Removing the cross bar" on page
Upgrade and Maintenance Manual
49.
87.
53.
56.
"Removing the riser module 1"
80.
RX2540 M6