Fujitsu PRIMERGY RX2540 M6 Upgrade And Maintenance Manual page 135

2.5-inch HDD/SSD subsystem
– Up to 16 2.5-inch SAS/SATA HDD/SSD modules can be installed depending
on configuration.
The HDD/SSD modules are connected to the HDD backplane wirelessly.
This allows HDD/SSD modules to be plugged in or pulled out easily.
If the HDD/SSD modules are controlled by a RAID controller, defective
HDD/SSD modules can also be replaced during operation.
– Up to 24 2.5-inch HDD/SSD/PCIe SSD modules can be installed depending
on configuration.
The HDD / SSD / PCIe SSD modules are connected to the HDD backplane
wirelessly. This allows HDD/SSD/PCIe SSD modules to be plugged in or
pulled out easily.
If the HDD/SSD/PCIe SSD modules are controlled by a RAID controller,
defective HDD/SSD/PCIe SSD modules can be replaced during operation.
For information on RAID controllers controlling the HDD/SSD/PCIe SSD
modules, see
EDSFF SSD subsystem
Up to 64 EDSFF SSD modules can be installed.
The EDSFF SSD modules are connected to the EDSFF backplanes wirelessly.
This allows EDSFF SSD modules to be plugged in or pulled out easily.
Base units
There are six base units available.
Base unit
Type 1
Type 2
Type 3
Type 4
RX2540 M6
Hard disk drive (HDD) / solid state disk (SSD)
"Expansion cards and backup units" on page
Description
Base unit with up to 10x 3.5-inch HDDs
Base unit with up to 12x 3.5-inch HDDs
Base unit for up to 16x 2.5-inch HDDs /SSDs
Base unit for up to 24x 2.5-inch HDDs / SSDs /
PCIe SSDs
Upgrade and Maintenance Manual
233.
135