Hard disk drive (HDD) / solid state drive (SSD)
Figure 79: Installing the 2.5-inch HDD/SSD module
▶ Insert the HDD/SSD module into a drive bay and carefully push back as far
as it will go (1).
▶ Close the locking lever to lock the HDD/SSD module in place (2).
▶ When using a RAID array, add the additional HDD/SSD to the RAID array.
Configuring the RAID array, see the documentation of the RAID
controller, used in your configuration, see
page
26.
Concluding steps
▶
"Reassembling" on page
7.5.5
Removing 2.5-inch HDD/SSD modules
Customer Replaceable
Unit (CRU)
154
54.
Upgrade and Maintenance Manual
"Documentation overview" on
Hardware: 5 minutes
TX1320 M5