Basic Information - Fujitsu PRIMERGY RX2540 M6 Upgrade And Maintenance Manual

Hide thumbs Also See for PRIMERGY RX2540 M6:
Table of Contents

Advertisement

Hard disk drive (HDD) / solid state disk (SSD)
7.2

Basic information

The HDD or SSD and the installation frame together make up the HDD module
or SSD module.
The server is shipped with one of the following HDD or SSD subsystems:
– 3.5-inch HDD subsystem
– 2.5-inch HDD/SSD subsystem
– EDSFF SSD subsystem
3.5-inch HDD subsystem
Up to 10 3.5-inch SAS/SATA HDD modules or up to 12 3.5-inch SAS/SATA
HDD modules can be installed depending on configuration.
The HDD module is connected to the HDD backplane wirelessly. This allows
HDD modules to be plugged in or pulled out easily.
Hybrid configurations of SAS and SATA HDD modules are supported in
combination with an optional HDD controller.
For information on RAID controllers controlling the HDD modules, see
"Expansion cards and backup units" on page
134
Upgrade and Maintenance Manual
233.
RX2540 M6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents