▶ Connect the power cable to the RDX drive (1).
▶ Connect the end of the power cable to connector "PWR6" on the system
board.
▶ Connect the USB cable to the RDX drive (2).
▶ Connect the end of the USB cable to connector "USB4" (see close-up) on
the system board.
Concluding steps
▶
"Installing the fan cage" on page
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ If applicable,
"Installing the front cover with lock" on page
▶
"Resuming BitLocker functionality" on page
13.5.2
Removing the RDX drive
Upgrade and Repair Unit
(URU)
Tools:
Phillips PH2 / (+) No. 2 screw driver
Preliminary steps
▶
"Removing backup and optical disk media" on page
▶
"Suspending BitLocker functionality" on page
▶ If applicable,
"Removing the front cover with lock" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
RX2540 M6
76.
60.
65.
69.
52.
Upgrade and Maintenance Manual
Accessible drives
69.
105.
Hardware: 10 minutes
90.
87.
53.
56.
52.
437