Fujitsu PRIMERGY RX2540 M6 Upgrade And Maintenance Manual page 154

Hard disk drive (HDD) / solid state disk (SSD)
Installing the new 10x 3.5-inch HDD backplane
Figure 64: Installing the 10x 3.5-inch HDD backplane
▶ Insert the HDD backplane into the chassis.
▶ Fasten the eight screws (see circles).
▶ If applicable, install the internal RAID riser module, see
"Installing the
internal RAID riser module" on page 271.
Figure 65: Connecting cables to the 10x 3.5-inch HDD backplane
▶ Connect the following cables to the HDD backplane:
154 Upgrade and Maintenance Manual RX2540 M6