Fujitsu PRIMERGY RX2540 M6 Upgrade And Maintenance Manual page 290

Expansion cards and backup units
Installing the new riser card
Figure 177: Installing the riser card
▶ Insert the riser card.
▶ Fasten the riser card with four screws (see circles).
▶ Install the expansion card, see
module" on page
Concluding steps
▶ Install the corresponding riser module, see
page 72.
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ If applicable,
"Installing the front cover with lock" on page
290
"Installing the expansion card in a riser
281.
60.
69.
Upgrade and Maintenance Manual
"Installing a riser module" on
65.
69.
RX2540 M6