Fujitsu PRIMERGY RX2540 M6 Upgrade And Maintenance Manual page 158

Hard disk drive (HDD) / solid state disk (SSD)
Figure 68: Connecting cables to the 12x 3.5-inch HDD backplane
▶ Connect the following cables to the HDD backplane:
1 SAS/SATA cable
2 SAS/SATA cable
3 Power cable
4 SAS/SATA cable
5 OOB cable
For the cable plan, see
Concluding steps
▶ Insert all HDD/SSD modules, see
page 147.
Ensure that you install the HDD module in the bay it was located
before the HDD backplane replacement.
▶ Insert all dummy modules, see
on page 150.
▶
"Installing the fan cage" on page
158
"Appendix B" on page
"Installing a 3.5-inch HDD module" on
"Installing a 3.5-inch HDD dummy module"
76.
Upgrade and Maintenance Manual
571.
RX2540 M6