Fujitsu PRIMERGY RX2540 M6 Upgrade And Maintenance Manual page 559

17.2.3 Server rear
17.2.3.1 Connectors on the server rear
Figure 385: Connectors on the server rear
1 VGA connector
2 Serial interface connector
3 Shared LAN connector (LAN1)
The serial interface connector (2) can be used as the standard interface
or for communication with iRMC. The serial interface connector is an
option.
The first left connector of OCP module can be used as Shared LAN
connector (3). OCP modules are options and available in different
variants.
Depending on the BIOS settings, the shared LAN connector may also
be used as a management LAN connector. For more information, see
the corresponding BIOS Setup Utility reference manual.
Some of the devices connected require special software (e.g. drivers)
(see documentation for the connected device).
Liquid cooling configuration
A LC configuration is provided on special release request only.
RX2540 M6
4
5
Upgrade and Maintenance Manual
Management LAN connector
USB 3.0 connectors (2x)
Appendix A
559