Removing 2.5-Inch Pcie Ssd Modules - Fujitsu PRIMERGY RX2540 M6 Upgrade And Maintenance Manual

▶ Pinch the green locking clips (1) and open the locking lever (2).
Figure 82: Installing the 2.5-inch PCIe SSD module
▶ Insert the PCIe SSD module into a drive bay and carefully push back as far
as it will go (1).
▶ Close the locking lever to lock the PCIe SSD module in place (2).
Concluding steps
▶ If applicable,
"Switching on the server" on page
▶ If applicable,
"Installing the front cover with lock" on page
▶ If applicable, rescan available devices from your operating system.
7.5.6

Removing 2.5-inch PCIe SSD modules

Customer Replaceable
Unit (CRU)
Tools: tool-less
RX2540 M6
Hard disk drive (HDD) / solid state disk (SSD)
Upgrade and Maintenance Manual
69.
69.
Hardware: 5 minutes
175