7.5.10.2
Installing EDSFF SSD modules
Customer Replaceable
Unit (CRU)
Tools:
tool-less
The EDSFF SSD module is controlled by an onboard controller. For
more information, see the Intel VROC user guide. If VMD function is
disabled in BIOS, the EDSFF SSD module is not supported. If VMD
function is enabled in BIOS, see the "Intel Virtual RAID on CPU (Intel
VROC) User Guide" for more information.
Preliminary steps
▶ If applicable,
"Removing the front cover with lock" on page
▶ Locate the correct drive bay, see
▶ Depending on your OS:
Removing an EDSFF dummy module
Figure 93: Removing an EDSFF dummy module
▶ Press both tabs together (1) and pull the dummy module out of its bay (2).
RX2540 M6
Hard disk drive (HDD) / solid state disk (SSD)
"Overview of configurations" on page
"Shutting down the server" on page
Upgrade and Maintenance Manual
Hardware: 5 minutes
52.
52.
188.
191