Specifications Of The Tms Unit; Accessories; Table 6.1 Specifications Of The Tms Unit; Table 6.2 Accessories - Edwards STP Series Instruction Manual

6

Specifications of the TMS Unit

6.1 Specifications of the TMS Unit
Setting temperature
Safety High-temperature error
function Low-temperature error
Ambient temperature range
Storage temperature range
Input For heater and valve
voltage
For control
Allowable input voltage fluctuation
Input For heater and valve
power
For control
Temperature control system
Panel indication LED
Input/Output terminals
Input/Output cables
6.2

Accessories

Name
TMS control unit
TMS valve
TMS heater
TMS power cable
TMS sensor cable
Spare fuse
Instruction manual
*1
: Low-temperature error is not detected within one hour after the TMS unit starts.
TMS Unit INSTRUCTION MANUAL for STP-301CVB3

Table 6.1 Specifications of the TMS Unit

Item
*1

Table 6.2 Accessories

250 V, 0.5 A
250 V, 2.0 A
250 V, 1.5 A
Specification
70 °C or more
50 °C or lower
–25 to 55 °C
100 VA (when TMS heater is ON)
4 VA (when TMS heater is OFF)
TMS heater and TMS valve ON/OFF control.
POWER ON
⚫
ALARM
⚫
POWER IN (J1)
⚫
HEATER OUT (J2)
⚫
COOLING VALVE OUT (J3) (3pin)
⚫
ISO VLV OUT (J4)
⚫
TC IN
⚫
INTERFACE
⚫
TMS power cable
⚫
TMS sensor cable
⚫
Q'ty
1
1 3 port, with connector on one side (1.5 m)
1 with heat insulator and connector on one
side (1.5 m)
1 with connectors at each end (1.5 m)
1 with connectors at each end (1.5 m)
1 For F1, F3
1 For F2
1 For F4
1
6-1
60 °C
0 to 40 °C
110 VAC
15 VDC
±10%
2.5 W
(Green LED)
(Red LED)
(3pin)
(3pin)
(3pin)
(5pin)
(9pin)
Remarks