3.6 Inputs menu
Menu icon, inputs
Function
▪
To display the value of the measured data (analog inputs) and the status of the
digital inputs (for example, emergency stop contact, motor overload relay, etc.).
▪
To select the digital input to be shown on the chart in the Main screen.
Procedure
▪
Start from the Main screen (refer to
▪
Use the Scroll keys to move the cursor to the Menu action button.
▪
Push the Enter key, the screen that follows is shown:
1. Menu
1. Menu
▪
Use the Scroll keys to move the cursor to the inputs icon (refer to the menu icon).
▪
Push the Enter key, almost the same as the screen that follows is shown:
6996022910_B
6996022910_B - Airlogic graphic regulator
Page 30
Main screen
on page 25):
2. Regulation
2. Regulation
09/2021 - ©Edwards Limited