Table of Contents
Advertisement
A540-55-880 Issue D
Description
Edit Display attributes menu
†
Set Time and Date
Display Pump Type
*
This option requires a security code to access it.
†
Time is set automatically when connected to a Fabworks network.
Each sub menu is described below.
A1.4.4
COMMANDS menu
Under the Setup menu. Scroll by pressing up/down keys. Press ENTER to open a sub menu or CANCEL to exit back to
the SETUP menu.
Gate Valve (Open/Shut)
MB Pump (On/Off)
PB Pump (On/Off)
Green Mode State (On/Off)
*
This option requires a security code to access it.
†
The PDT must be in control to perform these functions.
Press the up/down keys to select the new settings and press ENTER to accept or CANCEL to exit back to the
COMMANDS menu.
A1.4.5
INV FAULT HIST (Display Inverter Fault History) menu
Under the Setup menu. Scroll by pressing up/down keys. Press ENTER to open a sub menu or CANCEL to exit back to
the Setup menu.
Table A7 - INV FAULT HIST (Display Inverter Fault History) menu
DP Inv Fault Hist (Dry Pump Inverter Fault History)
MB Inv Fault Hist (Booster Inverter Fault History)
Each inverter fault history contains up to 32 entries, each contains one alarm and one warning, where 1 is the most
recent. Scroll by pressing up/down keys. Press CANCEL to exit back to the Inverter Fault History menu.
The inverter fault information is displayed in the following format:
DP Inv Fault nn
A:aaaa W:wwww
where nn is the number, aaaa is the alarm code, and wwww is the warning code.
Refer to
Section A2.3
for more information about inverter warnings and alarms.
A1.4.6
SOFTWARE VERSION Display menu
Under the Setup menu. Scroll through the software version loaded in the processors by pressing up/down keys. Press
CANCEL to exit back to the SETUP menu.
Page 52
Table A5 - SETUP menu
Table A6 - COMMANDS menu
*
†
†
†
Edwards and the Edwards logo are trademarks of Edwards Limited.
Display
Display Attr...
Set Clock...
Show Pump type...
© Edwards Limited 2015. All rights reserved.
Hide quick links:
Advertisement
Table of Contents
