Ems Button; Accessory Modules; Pump Display Terminal (Pdt); Pdt Adaptor Cable - Edwards iXL120N Instruction Manual

A541-11-880 Issue A
7.3.2

EMS button

An emergency stop button can be mounted on the dry pump and allows external connection to an EMS circuit.
Item
EMS button
7.3.3

Accessory modules

Two accessory modules are available for the iXL120(N) dry pump system. The Active Accessory Module (AAM) provides
connectivity for up to three directly connected accessories including a gate valve, abatement and water flow sensor,
plus up to two supported active accessories, two thermocouples and the pump status output. The Passive Accessory
Module (PAM) allows up to 3 accessories to be connected to the accessory module interface.
An accessory module extension cable allows the AAM or PAM to be mounted up to 5 m away from the dry pump system.
Accessory module
*
AAM
*
PAM
Accessory module extension cable (5 m)
*
The AAM and PAM cannot be mounted directly on the iXL120(N). Contact Edwards for details.
7.3.4

Pump Display Terminal (PDT)

The PDT allows control and monitoring of the iXL120(N).
Item
PDT
7.3.5

PDT adaptor cable

The PDT adaptor cable allows a second PDT to be connected to the iXL120(N).
Item
PDT adaptor cable
7.3.6

PDT holster

The PDT holster retains the PDT and is attached to the pump or tool frame.
Item
PDT holster
Page 36
Table 17 - EMS button
Table 18 - Accessories modules
Table 19 - PDT
Table 20 - PDT adaptor cable
Table 21 - PDT holster
Edwards and the Edwards logo are trademarks of Edwards Limited.
Item number
D37491500
Item number
D37480500
D37480550
D37491502
Item number
D37280700
Item number
D37491501
Item number
D37209800
© Edwards Limited 2010. All rights reserved.