Screen 7-1: Gateway Service Configuration – Example - HP LCS60 Installation Manual

LCS60 Configuration and Connection for Gateway Service
Screen 7-1: Gateway Service Configuration – Example
TCP-TO-ASYNCHRONOUS GATEWAY SERVICE CONFIGURATION MENU
1. Display/Change the LCS60 call address prompt
2. Add a service port
3. Delete a service port
4. Change/modify a service port
5. Display service ports
Enter Menu Selection
[ Type q to QUIT or ? for HELP ]
==> 2
Enter service port number
[ Type q to QUIT or ? for HELP ]
==> 4419
Enter service type "telnet", "socket", or "directory" for port 4419
[ Type q to QUIT or ? for HELP ]
==> telnet
Enter Pre-Defined call address or dash (-) for no call address
[ Type q to QUIT, ? for HELP, or press RETURN for default of "-" ]
==> mlkway/earth/yard
Enter TCP window size
[ Type q to QUIT, ? for HELP, or press RETURN for default of "1024" ]
==> Return
Enable 8-bit character mode for this port?
[ Type q to quit, ? for help, or press RETURN for default of "n" ]
Enter y,n ==> y
Enable the LCS60 NOHUP (no hangup) feature for this port?
[ Type q to quit, ? for help, or press RETURN for default of "n" ]
Enter y,n ==> y
Enable the LCS60 2WAY feature for this port?
[ Type q to quit, ? for help, or press RETURN for default of "n" ]
Enter y,n ==> y
Enable the LCS60 SID (Security Server Identification) feature for this
port?
[ Type q to quit, ? for help, or press RETURN for default of "n" ]
Enter y,n ==> y
Enter Security Server type "nac" or "other" for port 4419
[ Type q to QUIT, ? for HELP, or press RETURN for default of "nac" ]
7-4
Screen 7-1: continued on next page
Issue 3