Overview Of Cli Storage Configuration Procedures - HP StorageWorks Modular Smart Array 1000 cs User Manual

Overview and Setup

Overview of CLI storage configuration procedures

When using the CLI to initially configure the MSA1000 Controller and its
storage, use the following sequence:
1. Enter array controller settings, including global parameters.
Note:
environments must assign a unique ID number to each array controller.
See
2. Create the LUNs.
Note:
ID number to each LUN. See
instructions.
3. Enter connection information about the HBAs with access to the MSA.
Note:
(profile type.) See
4. (Optional) Limit access to the storage.
14
See "Array controller configuration commands" on page 32
descriptions.
In addition to setting the global parameters for the controller, OpenVMS
"Setting the controller ID" on page 33
See "LUN management commands" on page 35
In addition to creating the LUNs, OpenVMS environments must assign a unique
See "Server connection commands" on page 50
Each server accessing the storage must identify its operating system
"Setting the connection profile" on page 52
See "Access control list
Modular Smart Array 1000/1500 cs Command Line Interface User Guide
for instructions.
"Assigning a name or ID to a LUN" on page 43
commands" on page 55 for command descriptions.
for command
for command descriptions.
for command descriptions.
for instructions.
for