Figure 7-2: Gateway Services Configuration - HP LCS60 Installation Manual

LCS60 Configuration and Connection for Gateway Service
Note: The user should familiarize him/herself with all aspects of the LCS60
gateway service. For details, including a description of service ports,
refer to Chapter 1.
After configuring the LCS60 as described under Initial Setup in Chapter 3, per-
form the steps shown in Figure 7-2 to configure the LCS60 Gateway Services.

Figure 7-2: Gateway Services Configuration

config protocol
tcpip
tcpasy
asytcp
srvsetup
1 . Enter the lcsadm interface.
2 . Add the gateway service:
From the Config directory, enter protocol, or enter config protocol
at the Top directory.
Add tcpip (as required).
Add tcpasy and/or asytcp as required.
3 . Define the Gateway service sessions (maxsessions):
7-2
maxsessions
telnet
srvports
socket
directory
etherif
start all
Issue 3