Figure F-7: Ip Address Screen - HP LCS60 Installation Manual

Notes: US Robotics Sportster in the preceding figure is the dialing script (CCL)
which contains the necessary instructions to set up the modem and log
on to the LCS60. Modem Port selects which device the modem is
connected to; the modem port is usually designated. When setting
your physical link parameters (LCP) you can take the defaults as
shown on the right. Make sure PAP/CHAP authentication are not
selected. Authentication is handled by the NAC.

Figure F-7: IP Address Screen

Note: If you are using a privately administered IP address, enter it in the Local
IP Address field on the screen above, otherwise the LCS60 will
dynamically assign an IP address (when a negotiable IP address has been
administered in the client software package).
Issue 3
PPP Service Examples
F-17