HP LCS60 Installation Manual page 96

Configure Protocols and Gateway Services — srvsetup
Added reserved IP address [ 154.12.23.7 ] for [ tbaker ]
within IP Network Security Group [ morse ]
RESERVED IP ADDRESSES FOR SLIP AND PPP SERVICES
1 Add Reserved IP Address
2 Delete Reserved IP Address
3 Edit Reserved IP Address
4 Display Reserved IP Address
Enter Menu Selection
[ ? for help, q to quit, RETURN for menu ]
==> q
IP ADDRESS CONFIGURATION MANAGEMENT FOR SLIP AND PPP SERVICES
1 Configure/Display IP Network Security Groups
2 Configure/Display Reserved IP Addresses
Enter Menu Selection
[ ? for help, q to quit, RETURN for menu ]
==> q
Note: The following prompts (atalkas) will be displayed only if ARAP or PPP
is configured.
Note: It is not necessary to configure the LCS60's Ethernet interface for
AppleTalk. The LCS60 is not a seed router on the Ethernet. It will dis-
cover the network range and the zones assigned to the Ethernet by
another router and will dynamically acquire a unique AppleTalk node
address within the assigned network number range.
*** This step allows the LCS60 Administrator to configure the virtual AppleTalk
*** network and zone, which are used by < ppp arap > for dynamic allocation of
*** AppleTalk Addresses. Since one or more of these services is currently
*** configured, ATALKAS must be configured.
CONFIGURE ADDRESS AND ZONE FOR APPLETALK VIRTUAL NETWORK
1 Configure Address and Zone Name
2 Display Address and Zone Name
3 Delete Address and Zone Name
3-18 Issue 3