Table of Contents
Advertisement
Initial Setup
Caution:
You have super-user permission and could inadvertently
change/delete any and all files, therefore, it is important that you
follow these steps verbatim.
Step 5
Assign a password to root by using the passwd root command. The
password must contain at least six characters. Only the first eight
characters are significant; longer passwords can be used but the
additional characters are ignored.
Step 6
Enter the LCSADM system administration interface by entering
lcsadm at the root prompt.
Figure 3-2: initsetup
new installation or reinstallion
initsetup
nodename
datetime
Caution:
Only one system administrator at a time should be using lcsadm to
configure the LCS60. Use the lcsadm interface for all system
administration; do not attempt to adjust individual configuration
database files in any other way. If you attempt to execute any of
the configuration commands while another administrator is
executing Config commands, the following message will be
displayed:
3-4
assign a name to the LCS60
set date, timezone, and time
set software key to activate
softwarekey
LCS60 services
Issue 3
Advertisement
Chapters
Table of Contents
